The lubricant used in plastic processing is to improve the plastic, In particular, the fluidity
and demoulding of the Thermoplastic during processing and forming. The main function of
the lubricant is to reduce the friction between the plastic material and the processing
machinery and the inner parts of the plastic material, so as to improve the processing
performance of the plastic and the performance of the products. The viscosity of
polyethylene wax is much lower than that of plastic melt, so it can be used as melt index
modifier of plastic. Because of its good thermal stability, low volatility at high temperature
and good dispersion, it can improve the fluidity of plastic processing and thus improve the
plastic processing properties. PVC resin has excellent physical properties, can be made of
rigid and flexible products. The process includes extrusion, coating, injection, blow molding,
calendering and so on. Products are pipe, profile, sheet, hollow products, wire and cable
sheath and so on. PVC resin thermal stability is poor, in processing molding need to add heat
stabilizer and lubricant. The lubricant prevents the resin from remaining in the extruder or
from decomposing due to local overheating, and makes the resin easy to mold.
Polyethylene wax and oxidized polyethylene wax are mainly used for external lubrication
and have good lubrication in the middle and later stages of molding process. They can be
regarded as a medium-and late-stage lubricant and are suitable for the production of products
with complicated cross-section. It can be used in lead salt stabilization system, non-toxic
calcium- zinc composite stabilization system and rare earth composite stabilization system.
Such as A-C316A is a very good external lubricant, applied to all types of PVC processing
technology, especially in PVC calendering and extrusion process, can significantly improve
the plasticization of PVC, improve the mechanical strength of products; It has outstanding
anti-adhesion and anti-scorch property. However, the 316A is relatively expensive, and the
Qingdao Sainuo SN-3316 can replace the 316A to reduce the cost.
Qingdao Sainuo SN3316 is a high-density modified wax, it can promote plasticization, and it
has a good post-thermal stability, it can give products a good plasticization and luster, long
continuous production cycle, in masterbatch will increase dispersion and brightness, but it
has an effect on the oxidative induction period. It widely used in PVC products, Stabilizers
and Modified materials,etc.
Qingdao Sainuo Chemical Co.,Ltd. We are manufacturer for PE wax, PP wax, OPE wax,
EVA wax, PEMA, EBS,Zinc/Calcium Stearate…. Our products have passed the REACH,
ROHS, PAHS, FDA testing.
Sainuo rest assured wax, welcome your inquiry!
Adress：Room 2702,Block B, Suning Building, Jingkou Road, Licang District,